Nickel UNS N02201 Butt weld Elbow, Nickel 201 Butt Weld Pipe Fittings, ANSI B16.9 Nickel 201 Stub End, Nickel 201 Butt weld Fittings, Nickel 201 Seamless Buttweld Fittings, Nickel Alloy 201 Pipe Fittings, Nickel 201 Pipe Cap Supplier in Mumbai, India.
Metallica Metals is one of the leading Supplier and Manufacturer of value Nickel Alloy 201 Pipe Fittings, which effectively resists water containing hydrogen sulphide or carbon dioxide. The resistance of Nickel 201 Elbow Butt Weld Pipe Fittings to consumption by rdistilled and natural waters is excellent. In distilled water, the corrosion rate of Nickel 201 Tee Butt Weld Pipe Fittings has been found to be less. Corrosion rates of Nickel 201 Cross Butt Weld Pipe Fittings in residential water up to 200 Degree F (95 Degree C) are normally less and only occasionally high.
Nickel 201 Butt Weld Pipe Fittings, Nickel DIN 2.4068 Buttweld Fitting, Nickel 201 Buttweld Tee, ASTM B366 Nickel Alloy 201 Buttweld Fittings, Alloy 201 Butt weld Fittings, ASME SB366 201 Alloy Pipe Elbow Stockiest, Nickel NW 2201 Reducer Dealer, Nickel 201 Welded Butt weld Fittings Distributor in India.
In distilled water saturated with 50 / 50 carbon dioxide and air at 160 Degree F (71 Degree C), the consumption rate of Nickel 201 Reducer Butt Weld Pipe Fittings is less. Nickel 201 Bend Butt Weld Pipe Fittings is utilized for oil well strainers where corrosion by hydrogen sulfide and saline solution must be combatted.
Standard Specifications of Nickel Alloy 201 Pipe Fittings :
Specifications : ASTM B366 / ASME SB366
Thickness : 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75
Type : Seamless / Welded / Fabricated
Size : Seamless Butt Weld Fittings: 1/2″ – 10″, Welded Butt Weld Fittings: 1/2″ – 48″
Chemical Composition of Nickel Alloy 201 Pipe Fittings :
|Balance||0.15 max||–||0.35 max||0.35 max||0.40 max||–||0.01 max||0.25 max||–|
Mechanical & Physical Properties of Nickel Alloy 201 Pipe Fittings :
|Density||Melting Point||Yield Strength (0.2%Offset)||Tensile Strength||Elongation|
|8.9 g/cm3||1446 °C (2635 °F)||Psi – 21500 , MPa – 148||Psi – 67000 , MPa – 462||45 %|
Types of Monel Nickel Alloy 201 Pipe Fittings :
|Pipe Elbow||Pipe Tee|
|Pipe Cross||Pipe Reducer|
|Pipe End Cap||Pipe Bends|
|Pipe Stbend-Lap Joint|
Other Available Types of Nickel Alloy 201 Pipe Fittings :-
|Nickel Alloy 201 Buttweld Pipe Fittings||Nickel Alloy 201 Pipe Bend|
|Nickel Alloy 201 ASTM B366 Cross||ASTM B366 Nickel 201 Butt weld Fittings|
|Nickel Alloy 201 Nipple Distributor||ASME B16.9 Alloy 201 Buttweld 90° Elbow|
|Nickel 201 Pipe Elbow Manufacturer||Nickel Alloy DIN 2.4068 Butt weld Elbows|
|Nickel Alloy 201 Concentric Reducers||Nickel Alloy NW 2201 Equal Tee|
|ASTM B366 Nickel 201 Eccentric Reducer||Nickel Alloy 201 Short Radius Elbow|
|ANSI B16.9 Alloy 201 Butt weld Fittings Supplier||Nickel Alloy 201 Seamless Pipe Fittings|
|Nickel® Alloy 201 Welded Pipe Fittings||ASME SB366 201 Alloy Buttweld Tee Stockist|
Nickel Alloy 201 Pipe Fittings are offered with a NACE 3.1 Certification, Mill Test Certification and ISO 17025 Standards by a Government of India approved Laboratory. Positive Material Identification is done on all raw material procured at Metallica Metals India.
In 2016 we have ready stock of more than 50 tons of Nickel Alloy 201 Pipe Fittings in all sizes, to cater to immediate delivery and urgent needs of the clients. For small requirements we can dispatch the steel pipe & tubes immediately against the purchase order.
Export Destination of Nickel Alloy 201 Pipe Fittings
Metallica Metals India have exported of Nickel Alloy 201 Pipe Fittings to over 60 countries including to over 60 countries including Sudan,UAE, UK, Iran, Iraq, Qatar, Bahrain, Oman, Yemen, Lebanon, Jordan, Saudi Arabia, Malaysia, Indonesia, Singapore, Australia, New Zealand, USA, Canada, Mexico, Brazi, Netherlands, Germany, Italy, Spain, Serbia, Kuwait, Peru, Nigeria, Poland, South Africa, Denmark, Turkey, Egypt, Venezuela, Kuwait, Madagascar, Angloa & Srilanka.